Customer service

When the temperature changes abruptly, slight condensation may form under the watch glass. Generally, it disappears of its own accord without affecting the smooth running of the watch. However, if the misting persists, it is important to consult an official Chopard retailer or an official Chopard service centre.

For watch creations (water-resistant models only), make sure the crown and pushers are correctly pushed back and/or screwed in depending on the model. We recommend cleaning watches with liquid soap and regularly rinsing them under running water, especially if they are often worn in salt water. The use of chemical products to clean watches is not advisable, since it could damage its strap/bracelet and gaskets.

For jewellery creations, we recommend cleaning them with running water and a soft cloth, especially if they are often worn in salt water. The use of chemical products to clean jewellery creations is not advisable, especially with a view to preserving the gemstones’ appearance.

Chopard luxury watches are equipped with security gaskets that guarantee their water-resistance. Over time, these gaskets may deteriorate and the case may be less resistant to water. We kindly recommend having the water-resistance of a Chopard watch tested by an official service centre once every year, before engaging in any prolonged aquatic activity or after a violent shock.

Please note that leather straps should not be immersed in water. For frequent or prolonged use in water, we recommend a rubber strap or a steel bracelet rather than a leather strap. It is normal for leather straps to become slightly darker over time.

The movement of a Chopard luxury watch deserves particular care. In order to guarantee its performance, it must be serviced regularly by an official Chopard service center.

In order to guarantee the performance of a quartz watch, movement testing and battery replacement must be entrusted to an official Chopard service centre, which will ensure it respects the brand’s specific criteria. We strongly advise against leaving a worn-out battery in a watch, since it might damage the movement.

The water-resistance of a watch is generally given in metres (m) or bar (1 bar = 10 metres). A watch bearing the mention “Water-resistant”, with or without a pressure indication, must comply with and have successfully undergone the tests foreseen by the NIHS 92-20 norm (equivalent to the ISO-22810 international norm). They may be used in conditions involving variations in water or air pressure or temperature. However, regardless of whether or not there is an additional mention of the pressure, they are not intended for scuba diving. So-called diver’s watches are wristwatches that must be able to withstand diving at depths of at least 100 metres (330 ft), be equipped with a dive-time control system and meet all the criteria stipulated by NIHS 92-11 norm (ISO6425): luminosity, shock-resistance, resistance to magnetic fields and sturdy wristband. A Watch meeting the water-resistance ‘ISO 22810 norms’ (= min 20 meters or 2 bars of pressure), is said WATER RESISTANT, covering all ordinary aquatic activities !

Wrist movements are the key element in winding a self-winding watch. The energy used for winding such a mechanical movement is accumulated in the barrel spring(s) via the oscillating weight, thus ensuring a sufficient reserve of power which is subsequently released as required. If a self-winding watch is not worn for a certain period of time, its movement stops, because the barrel(s) will not have enough energy to make the movement work. Before being worn again, the watch must be manually wound by turning the crown several times in a clockwise direction in order to build up a sufficient power reserve.

A hand-wound watch must be regularly wound using the crown in order to ensure its smooth running. This operation can be done at any time of the day without any risk of damaging the movement. Manual winding is complete when one can sense a certain resistance of the crown. To avoid damaging the movement, it is therefore important not to force the crown beyond this point. Some L.U.C. watches models can be indefinitely wound because they have a so-called “slipping spring” system fitted to the barrel. This system avoids any excessive tension of the springs and prevents the winding from locking and the barrel spring from breaking when the barrel is completely rewound.

Hand-wound L.U.C. Tourbillion watches models come with a winding assistance tool that facilitates the adjustment of the watch. As these models require a longer winding, the winding assistance tool has been developed to make this operation more comfortable. The tool must not be used when adjusting the hours and minutes, since it could damage the winding stem and crown.